Hi.
I have set up a Solax X1-AC in lead acid mode, as the battery I have is based on "dumb" BMSs.
It uses 4 Mitsubishi Outlander PHEV modules in seres, so 64S li-ion.
I have a 75k resistor between BMS connection pins 1&2 to emulate a temperature sensor
The inverter is working normally, except that the battery "fullness" indicator is showing empty and flashing.
I am able to set and retain the battery float voltage, charging current and discharge current.
I am not able to set the absorption voltage or the cutoff voltage (whatever I set is not retained)
Could anyone please help with this?
Is it that the settings need to be made in a particular mode?
Do the settings need to be within a particular range with respect to eachother?
Thanks
I have set up a Solax X1-AC in lead acid mode, as the battery I have is based on "dumb" BMSs.
It uses 4 Mitsubishi Outlander PHEV modules in seres, so 64S li-ion.
I have a 75k resistor between BMS connection pins 1&2 to emulate a temperature sensor
The inverter is working normally, except that the battery "fullness" indicator is showing empty and flashing.
I am able to set and retain the battery float voltage, charging current and discharge current.
I am not able to set the absorption voltage or the cutoff voltage (whatever I set is not retained)
Could anyone please help with this?
Is it that the settings need to be made in a particular mode?
Do the settings need to be within a particular range with respect to eachother?
Thanks